 |
|
> MSDC 02PDA - PDA Download Cable & Software License (available from Race Tech - $74.99) > USB/Serial Adapter Cable - PC Only A USB to Serial Adapter cable is available for computers without a serial port. - USB/Serial Adapter – MSDA 01 – $39.99
> Complete Transducer Assemblies Standard Carbon-Carbon Style (Inner and Outer Tubes are Carbon Fiber) (includes Transducer Head but without clamps) - 15” MX - MSTA 62515 - $159.99 - 8” MX Laid-Down - MSTA 62508 - $159.99 - 6” RR - MSTA 62506 - $159.99
Control Rod Style Transducer Assemblies (used on front forks only - no side loading allowed) - 9" Mountain Bike Front - MSTA R62509 - $139.99 - 7" Road Race Front - MSTA R62507 - $139.99
> Replacement Wave-Guide Tubes The Wave-Guide Tubes can be replaced individually or as complete sets. If you plan to test both dirt and street bikes, other vehicles like minis or ATV’s, etc., purchase extra tube sets and cut them to fit other applications (see 3.5 Shortening the Tubes).
– 15” Travel - MX
– 8” Travel - MX Laid-Down
– 6” Travel - Road Race
– 9” Travel Control Rod Type - Mountain Bike Front
– 7” Travel Control Rod Type - Road Race Front
> Transducer Head - Transducer Head 5/8" - MSTH 62501 - $129.99
> Wave-Guide Clamps - Clamp Assy 5/8” - MSCL 62501 - $19.99 - Clamp Assy 1/2” - MSCL 50001 - $19.99
> Remote Record Switch The Remote Record Switch included in the Pro Kit can be purchased separately. - Remote Record Switch (May 2004+) - MSRS 03 – $54.99 - Remote Record Switch (pre May 2004) - MSRS 02 – $64.99
- ShockClocks prior to May 2004 require MSRS 02. - ShockClocks after May 2004 can use either switch. - Any combination of early and late must use the MSRS 02 switch.
> Note for earlier ShockClocks: ShockClocks prior to 2004 may require Remote Record Switch Adapters. These use “power jack” style connectors. Call for information.
> Leverage Ratio Analysis Kit For ShockClock Pro Owners. Allows rapid generation of Leverage Ratio Curves and Rear Wheel Force Curves. This software can convert a rear wheel recording into an “as if recorded at the Shock”. Kit includes mounting hardware and a special Leverage Ratio Wave-Guide Tube.
- Leverage Ratio Kit - MSLR 01 - $249.99
- Note: LR Kit requires two ShockClocks, two Transducers, and a Remote Record Switch. These are included in Pro Kits. Standard ShockClock owners can purchase these items separately. |
